AeroHog™ 360 Vent Pipe Filters

Introducing the all new AeroHog 360! The very best vent pipe odor control is now available with the latest PATENTED technology cap.

The AeroHog 360 is fitted with an aerodynamic, black polycarbonate rain cap that uses a patented design to help pull unwanted stinky gas right out of your vent pipe. This is especially important for people living in windy areas.

All AeroHog 360s come complete with Vapor Phase Pelletized Charcoal in a fiberglass mesh bag. To replenish the carbon, simply pull off the cap, pull the old carbon bag out and slide in a new one. For convenience and compatibility, the AeroHog 360 uses the same carbon replacement bags as our regular OdorHogs.

All AeroHog 360s come with a UV Resistant Rubber Coupling and 2 stainless steel clamps to fit both standard vent pipes and non-standard Cast Iron, Copper and Steel Pipes.

The AeroHog 360 comes in Black ABS. If you would like to have a white PVC version instead, just request PVC in the "comments" section of our online order form during check-out. As always, we recommend Black ABS for cold climates.

If a roof line or chimney is close to a vent pipe and the vent pipe opening is situated below the roof line, the pipe can be subjected to turbulence and downdrafts. An unprotected vent pipe can cause air to blow down the pipe, pressurizing the vent pipe and forcing fumes to back up into the home’s venting system. To prevent this situation, many buildings are designed to have vent pipes at least 6” higher than the highest object; however, it takes a downdraft of only 13 degrees or more to pressurize a vent system.

• Using the AeroHog 360, low pressure is created at the exhaust port with even the slightest air movement, regardless of wind direction or angle.
• The AeroHog 360 channels the wind toward the center - using the air as a tool; it draws up fumes, inhibiting any possibility of a downdraft.
• The AeroHog 360 eliminates odors through increased ventilation and restricting downdrafts.